Electric Motor Blog

If you only have single-phase 220 V electricity at home, in a small workshop, a garden or on a farm, the motor you can use is a single-phase motor. When you ask for prices, even tw... More Details

Many companies sell electric motors in Türkiye. When prices look similar, the real difference shows in the information the seller gives you and in how the order is handled afterwar... More Details

You no longer need to spend hours on the phone asking for prices: you can order an electric motor online in a few minutes. In this article we explain every step of buying a motor f... More Details

“How much is this motor?” has no single answer. But if you divide the price by the motor’s power, an interesting picture appears: on a small motor every kilowatt costs much more, w... More Details

A buyer opening a motor price list usually hunts for one line: "how much is 7.5 kW?" What they find is a range rather than a single figure, and the gap between the low and high end... More Details

Monday morning, the fan motor on a cooling tower burns out. The maintenance manager has two options: send it for rewinding or buy a new one. Rewinding takes days. A new motor can b... More Details

A 4-pole, 250 kW IE3 motor on a 400 V supply draws about 418 A at rated load. Started direct on line, that climbs to roughly 3000 A. The motor weighs over a tonne and delivers arou... More Details

Several boundaries meet at 3 kW. It is one of the ratings where the single-phase or three-phase question comes up most, the last three-phase rating that runs in star on a 400 V sup... More Details

A feed mill is installing a new horizontal mixer. The machine builder's data sheet gives exactly two lines: the mixer shaft turns at 45 rpm, and with a full trough it needs about 1... More Details

Here is a scene maintenance teams know well: a burnt-out pump motor, and in its panel an overload relay that never tripped. The relay works fine. Its dial is set to 32 A, while the... More Details

At a flour mill, the same bucket elevator motor burned out three times in a year. Each time it went to the rewinder, came back with a new winding and was bolted back in place. Afte... More Details

You usually find out that a motor order went wrong the moment the motor is unpacked next to the machine. The flange holes don't line up, the shaft is too thick for the coupling, or... More Details

It is commissioning day. The electrician opens the terminal box and finds two thin leads next to the three power terminals: the PTC sensors embedded in the winding. The panel, howe... More Details

A machine builder writing the spec for a new packaging line types, out of habit, "IP65, class H, PTC, heater, special colour". The line will sit in a closed, dry hall with a stable... More Details

Salt air does most of its damage within the first few hundred metres of the shoreline. Spray from breaking waves stays airborne, drifts inland with the wind and settles on every su... More Details

The message that slows an after-sales case down the most is usually a single line: "The motor we bought last month has burnt out, please replace it." The supplier's only possible r... More Details

Picture a 37 kW extract fan running 6,000 hours a year with its outlet damper half closed. At the maintenance budget meeting, the proposal on the table is to upgrade the motor from... More Details

Replacing a single burnt-out pump motor rarely needs anyone to visit the plant. A clear nameplate photo, a few dimensions and a note of the machine it drives are usually enough. Sc... More Details

Most companies walk into a dealership meeting with one question in mind: what is the discount? Yet whether a motor dealership makes money depends far more on the things the contrac... More Details

Picture two motors fed from the same switchroom at a wastewater treatment plant. One drives an aeration blower at around 3000 rpm; the other turns the bridge of a clarifier so slow... More Details