Water transfer, ventilation, smoke extraction, pressurisation... in every one of these tasks the power comes from a motor that often runs uninterrupted for long hours. Pump, fan and blower applications are among the places where motors work hardest in industry. At HEM Motor we produce motors tailored to these applications in-house and deliver from stock, offering durability and efficiency together.
Because these systems usually run non-stop, motor efficiency feeds straight into the annual energy bill. Slip near full load in our motors is about 4%, and they are built with IP55 protection and Class F insulation. In high-temperature applications such as smoke extraction, the insulation class and protection level become decisive in selection.
In these applications the lowest operating cost comes from pairing a high-efficiency motor with a variable speed drive (inverter); adjusting flow on demand brings significant savings. For more efficient options see our IE4 and IE5 series. For model selection to suit your system, current stock and a quote, call +90 (532) 345 49 86 or use our contact page.
When replacing the motor of a multistage high-pressure pump, the three most critical points are these: the new motor's speed must be very close to the old one, because as the numbe... More Details
When the fan motor of an air handling unit is replaced, the new motor must match not only in power and speed but also work with the existing fan's mechanical connection and with th... More Details
When choosing the motor for a dust collection extractor, many people treat a dirty filter as the worst case. For radial fans the opposite is true: when the filter is clean or a bag... More Details
When choosing the motor for a centrifugal (scroll-housing) fan, first find the speed at which the impeller must turn, then calculate the power the fan draws at that speed, and fina... More Details
When choosing the motor for an industrial vacuum pump, three questions are decisive: at what speed was the pump designed to run, how is the motor connected to the pump, and how man... More Details
The motor power for a surface irrigation pump is found by adding a margin to the shaft power calculated from the pump's flow and head; the speed is the speed the pump was designed ... More Details
Replacing the motor on a horizontal water pump is often thought of as "find a motor with the same power and speed, then fit it". In reality, the main part of the job is making sure... More Details
In a milking system, when the vacuum pump stops, milking stops too. Because cows have to be milked at set times, a pump motor failure is one of the jobs on a farm that cannot wait.... More Details
In biological wastewater treatment plants, the blower that pushes air into the aeration basin is considered the heart of the plant. If the bacteria run out of oxygen the treatment ... More Details
In drying, baking, paint curing and heat treatment ovens, the fan that circulates hot air is one of the parts of the line that never stops. When the electric motor driving the fan ... More Details
In grain drying plants, the fan is the main piece of equipment that drives heated air through the mass of product and carries moisture out. During harvest it runs for days without ... More Details
In wastewater lifting stations and in the pump buildings of treatment plants, a large share of pumps is installed in a dry well. The pump stands in a dry room separated by a wall f... More Details
When the motor of a centrifugal pump fails during the irrigation season, the first question is usually "how many kW and what speed?" The power is written on the nameplate, but spee... More Details
A booster set is a pump and tank arrangement that keeps the pressure in the water network of a building or plant within a fixed range. When a tap is opened the pressure drops and t... More Details
A cooling tower is a heat exchanger that cools process water or air-conditioning condenser water by bringing it into contact with air. The fan on top of or beside the tower continu... More Details
A scroll fan is a radial (centrifugal) fan named after the spiral shape of its housing. It draws air in along the axis, throws it outwards and converts it into pressure thanks to t... More Details
In dust collection systems the fan is the heart of the filter collector: it draws dusty air from the extraction points through bags or cartridges and discharges the cleaned air. Wh... More Details
English
Français
Türkçe
Español
Русский
