three-phase fan motor

Ventilation means renewing the air in a building or plant, removing contaminated air and, where needed, supplying air to a process. The roof extractor on a factory, the jet fan und... More Details

In a building's air-conditioning installation, electric motors work in places nobody sees: in the fan section of the rooftop air handling unit, in the circulation pumps of the base... More Details

Green bricks and tiles leaving the press must lose most of their water before entering the kiln; if this water is not removed slowly and evenly, the product cracks or warps. In the... More Details

A blower is a machine that delivers air continuously at a pressure a fan cannot reach but far below that of a compressor; it sends air to the diffusers of a treatment basin, to a p... More Details

A plug fan is a centrifugal impeller without a scroll housing, placed in an open chamber (plenum) inside an air handling unit or ventilation cabinet. Because the impeller sits dire... More Details

A wall-mounted axial fan is a propeller fan fitted into an opening in an outer wall or partition, usually carried on a mounting plate or square frame. These fans are expected to re... More Details

A vane axial fan carries fixed guide vanes inside its cylindrical casing, placed directly behind or in front of the impeller. Air leaves the impeller with a swirl; the stationary v... More Details

In the wheel of a radial straight-blade fan the blades run outward from the hub without any curvature. This simple geometry does not win the efficiency race, but it is one of the f... More Details

An air handling unit (AHU) filters outdoor and return air inside a casing, heats or cools it, humidifies it when needed and distributes it through the building; the supply and exha... More Details

Maize, paddy rice or wheat coming from the harvest is often too wet to store; a grain dryer removes the excess water by passing hot air through the grain mass. Several different el... More Details

In a joinery shop or furniture factory every machine produces chips and dust: the planer throws thick chips, the circular saw fine sawdust, and the sander a flour-like dust that ha... More Details

A cooling tower lets water that returns warm from an industrial process or a building's chiller flow down over fill material and meet the air passing through; part of the water eva... More Details

An industrial tumble dryer dries damp textile goods coming out of extraction with hot air inside a rotating drum; it is used in hotel and hospital laundries, in the washing section... More Details

An automatic car wash machine may look like a single unit, yet several electric motors with very different jobs work inside it: drives that spin the brushes, the travel system that... More Details

When a stenter fan motor is replaced, two conditions are decisive: the temperature where the motor sits must be at a level a standard IP55, class F motor can work in, and the new m... More Details