1500 rpm three-phase motor

Sand, chippings and gravel coming out of crushers and screens wait in separate piles in the open yard until they are sold or shipped. The machine that builds these piles is the sto... More Details

Before a marble, granite or travertine slab becomes a saleable product, it is divided into strips of a set width and pieces of a set length. Two machines share this work: the strip... More Details

Machines that press concrete blocks, pumice blocks, paving stones and kerbs are the concrete-based branch of the group we describe in general terms on our brick, tile and ceramic p... More Details

Loose cardboard, stretch film, PET bottles, tin cans or textile offcuts take up a lot of space in storage; a baling press turns this material into tied, stackable blocks. This page... More Details

If waste glass bottles, jars and flat glass offcuts are moved without crushing, they take up a lot of space and sorting becomes harder. A glass crushing machine reduces this materi... More Details

A vacuum pump removes gas from a closed volume and creates a pressure below atmospheric there. Typical examples are drawing air out of bags on packaging machines, holding panels on... More Details

When washed sand leaves the sand washer or hydrocyclone, it still carries most of its water; if it is dumped on the stockpile like that, water drains from the pile for days and the... More Details

Clay, silt and dust left in sand after crushing and screening are unwanted contaminants in concrete and plaster. The machines that remove them work in water, turning very slowly wh... More Details

A block cutter is known in the Turkish stone trade as the “este”. It turns a raw quarry block straight into slabs or thick slices with large-diameter diamond blades; unlike a gang ... More Details

A band saw machine cuts wood with a thin saw band whose ends are welded into an endless loop and which runs tensioned between two wheels. For the other machines in the woodworking ... More Details

Lathes, milling machines, drills, saws and grinders work with the same need everywhere, from a small repair shop to a plant turning out series parts: a dependable electric motor th... More Details

A metal lathe turns a workpiece clamped in the chuck and removes chips with a stationary tool, producing cylindrical parts such as shafts, bushes, flanges and gear blanks. Motor pa... More Details

This category covers four-pole (4-pole) three-phase asynchronous motors that turn their magnetic field at 1500 rpm when fed from 50 Hz mains. Most general-purpose industrial machin... More Details