6-pole electric motor

The HEM Motor cast iron frame range consists of 81 three-phase models, stretching from a small 0.55 kW pump motor to a 355 kW mill drive. This page reads the range like a map: IEC ... More Details

Several boundaries meet at 3 kW. It is one of the ratings where the single-phase or three-phase question comes up most, the last three-phase rating that runs in star on a 400 V sup... More Details

In a cone crusher, stone is broken by being squeezed between an open bowl at the top and a mantle gyrating inside it. The motor turns a horizontal pinion shaft; the pinion drives t... More Details

A rotary screen, or trommel as it is called on site, is a large inclined cylinder whose shell is made of perforated plate or screen panels. As it turns slowly, the material inside ... More Details

In a brick and tile plant, the head of the preparation line is where clay and additives are first measured in a set proportion and fed into the line. This job is done by the box fe... More Details

A plastic shredder pre-shreds large, thick plastics that are hard to feed into a granulator — purge lumps, drums, IBC tanks, bundles of pipe and baled film — with slowly turning kn... More Details

An industrial tumble dryer dries damp textile goods coming out of extraction with hot air inside a rotating drum; it is used in hotel and hospital laundries, in the washing section... More Details

A 1000 rpm electric motor is a three-phase induction machine whose stator carries six magnetic poles. With a 50 Hz supply this winding layout fixes the rotating field at 1000 revol... More Details

On a low-speed conveyor, the choice between a 4-pole and a 6-pole motor does not change the torque that pulls the belt at the gearbox output; for the same power and the same drum s... More Details

On a cold storage condenser, a standard three-phase motor can be used if the fan propeller is fitted to the shaft of a separate IEC-frame motor or driven by a belt. In external-rot... More Details