Products

K Series Type 7515 Bevel Helical Gear Reducers K Series bevel helical gear reducers are one of the powerful and efficient reducer types used in industrial machinery requiring high... More Details

Ventilation means renewing the air in a building or plant, removing contaminated air and, where needed, supplying air to a process. The roof extractor on a factory, the jet fan und... More Details

A gear reducer brings the high speed coming from the motor down to the low speed the machine needs and, in doing so, increases the torque on the output shaft by the same ratio. How... More Details

In most plants, moving material from one point to another is left to a conveyor: crushed stone leaving the quarry, cartons entering a warehouse, wheat rising to a silo or bricks le... More Details

A concrete plant has no single main motor; every step from the aggregate bin to the mixer gate is run by a separate drive. A weighing belt measures the aggregate, an inclined charg... More Details

In a feed mill, dozens of machines run in sequence from raw material intake to the bag: grain and meal rise to the silo by elevator, are broken down in the grinder, weighed by dosi... More Details

A flour mill is a long chain of machines linked by pipes and elevators, from the silo that receives wheat to the bag. The grain is first cleaned and tempered, then broken down step... More Details

On a farm or in an agricultural plant the electric motor usually works in places nobody looks at: at the head of the bucket elevator that lifts harvested grain to the top of the si... More Details

In a mining operation, ore or raw material travels a long way from the moment it leaves the pit until it is shipped as a product: it is crushed, ground, classified, burned, dried, ... More Details

In a factory or warehouse, moving material usually requires an electric motor. The belt that takes raw material into the plant, the roller line carrying products from station to st... More Details

The last metres of a production line usually belong to packaging machines. The product is weighed, filled, closed, labelled, cased, palletised and wrapped before shipping. Each of ... More Details

A plastics plant houses loads that have almost nothing in common under one roof: the extruder screw turns against a steady torque all day, the granulator rotor takes a blow with ev... More Details

In a furniture workshop most motors turn a cutting tool: a saw blade, a planer cutterblock, a spindle moulder cutter or a sanding belt. With these tools the cut quality depends lar... More Details

In a building's air-conditioning installation, electric motors work in places nobody sees: in the fan section of the rooftop air handling unit, in the circulation pumps of the base... More Details

In a textile mill, motors work in two separate worlds. On one side are the spinning, weaving and knitting halls: the air is warm and humid, fibre floats constantly in the air, and ... More Details

HEM Motor HF Series Parallel Shaft Helical Gear Reducers are industrial power-transmission units with parallel input and output shafts, designed for high efficiency, a compact hous... More Details

HEM Motor M-HEM Series Foot-Mounted Helical Gear Reducers are foot-mounted industrial power-transmission units developed for high efficiency, strong torque transfer and long servic... More Details

IE5 is the top efficiency class defined in IEC 60034-30-1, and the HEM Motor 2026 catalogue lists it as "Ultra Premium". This page does not describe IE5 in general terms. It works ... More Details

Our aluminium frame three-phase range consists of 36 models: twelve power steps between 0.25 kW and 11 kW, with one motor at 1000, 1500 and 3000 rpm synchronous speed in each step.... More Details

HEM Motor's three-phase range consists of 117 sale models covering 0.25 kW to 355 kW. Read this page as a map of how those 117 models are arranged along three axes — power, IEC fra... More Details