IE4 Super Premium efficient motors have lower rotor and stator resistances, and therefore lower impedance, compared with classic IE1-IE2 motors. This is a desirable property in ter... More Details
The cast iron body is one of the most critical components determining the mechanical strength and vibration-damping ability of heavy-duty electric motors. Yet most buyers evaluate ... More Details
One of the most critical factors determining a crusher's performance in a stone crushing plant is the correct and balanced feeding of material to the main crusher. If the feeder ru... More Details
Selecting an IE3 electric motor at the correct power is only half the job for a sound installation. The other half is sizing the panel, the busbar system and the supply cable corre... More Details
Two-pole asynchronous motors rotate at approximately 3000 RPM synchronous speed on a 50 Hz grid, which makes them the fastest-running members of the electric motor family. High spe... More Details
When selecting an electric motor, most businesses look only at the rated power (kW) and the speed (RPM). Yet in fans, mills, flywheel machines, centrifuges and large pulley drives,... More Details
Fog cannon dust suppression systems are critical equipment used across quarries, crushing plants, scrap yards, mine stockpiles and excavation sites to capture airborne dust and bri... More Details
Investing in an efficient electric motor is the right decision for most businesses; but to prove that this decision really delivers a gain, a numerical basis is needed. It is easy ... More Details
Chocolate and confectionery production is one of the most sensitive and most continuously running branches of the food sector. From conching to tempering, from mixers to the enrobi... More Details
IE5 ultra premium efficiency synchronous reluctance motors (SynRM) have become an attractive option for plants that want to cut energy costs. However, the correct operation of thes... More Details
In plants that feed an IE4 super premium efficiency electric motor from a frequency inverter (VFD), there is a common and often misdiagnosed problem: the residual current device (R... More Details
No matter how well balanced and low-vibration a cast iron electric motor is built, the vibration problem does not disappear completely if the unit is mounted incorrectly in the fie... More Details
From an electrical standpoint, a crusher plant is one of the most demanding industrial environments imaginable: dozens of large electric motors operate on the same site, fed by a s... More Details
When engineers design an electric motor or order a replacement, one component is almost always overlooked: the cooling fan mounted on the rear end of the shaft and spinning beneath... More Details
The quiet, cool and efficient operation of an asynchronous motor is the result not only of the materials used, but also of how the winding is placed inside the stator. The angular ... More Details
The 2-pole high-speed electric motor sits at the heart of pumps, fans, compressors and centrifugal systems wherever industry demands rotational speed. The most distinctive feature ... More Details
Enclosed car parks are among the most critical yet least noticed ventilation zones in modern buildings. Carbon monoxide (CO) from vehicle exhaust, heavier-than-air gases that can l... More Details
A facility runs dozens, sometimes hundreds, of electric motors at the same time, and a large share of them were bought when the plant was first built — old motors that fall well be... More Details
Rubber and tire manufacturing is one of the most demanding industrial environments for an electric motor. From the internal mixer to the mill, from the extruder to the calender, ea... More Details
The synchronous reluctance motor (SynRM), the most widespread representative of the IE5 Ultra Premium efficiency class, has become a standout technology in recent years thanks to i... More Details
English
Türkçe