Crusher and stone-crushing plants are mostly built in the open field, on construction sites or in quarries, and their motors run all day in dusty, humid conditions with large tempe... More Details
An IE3 motor to be used in ship, offshore platform and marine projects must withstand far harsher conditions than a motor in a land plant. On board, a motor must cope simultaneousl... More Details
In many applications where the speed of asynchronous motors must be held steady and accurate, the motor's actual speed has to be measured and fed back to the drive. One of the olde... More Details
In high-power plants, an often-overlooked yet decisive topic in motor selection for cost and reliability is the supply voltage. Although the low-voltage grid standard in many count... More Details
In a food and beverage plant a pump, fan or blower motor must do far more than simply provide the right power and speed; it has to survive an aggressive hygienic cleaning regime, h... More Details
When exporting a machine or plant, the electric motor on it must suit the grid frequency and voltage of the country it is going to. While Turkey and most of Europe use a 50 Hz grid... More Details
One of the most insidious enemies of an electric motor appears not while it runs but while it stands still: condensation. When a motor stops, its frame cools, the air inside releas... More Details
The marine environment is one of the most demanding operating conditions in the world for an electric motor. Continuous vibration, the ship's inclination and roll motions, salty hu... More Details
IE4 super premium efficiency motors sit at the heart of modern, energy-saving drives. But a motor being highly efficient does not always mean it offers precise speed and position c... More Details
In large cast iron framed electric motors, bearing selection is one of the most critical decisions determining motor life and reliability. While rolling element bearings (ball and ... More Details
At the heart of the primary crushing stage in the mining and aggregate sector lies a machine that often defines the entire capacity of the plant: the gyratory crusher. This giant c... More Details
The 132 kW and 160 kW power class represents an important threshold in industrial electric motors. These powers appear frequently in large pumps, fans, compressors, conveyors, crus... More Details
In many facilities, the unnecessary heating, efficiency loss and even burnout of asynchronous motors often stems from an unexpected cause: the supply voltage rising above the rated... More Details
A 500 kW electric motor is no longer merely a machine component; it is an engineering and logistics project in itself. Motor selection in this power class is an integrated process ... More Details
At the heart of aeration basins in wastewater treatment plants, anaerobic digesters (fermenters) in biogas facilities, and many industrial process tanks lies a component that is of... More Details
The story of an electric motor does not end the day it is taken out of service. A high-efficiency motor, at the end of its life, leaves in your hands a valuable pile of raw materi... More Details
When we talk about how "quiet" an electric motor is, a single decibel number is often quoted; yet to understand motor noise correctly two separate quantities must be distinguished... More Details
IE5 is the "ultra-premium" efficiency class of the IEC 60034-30-1 standard, and today the most common way to reach this class is synchronous reluctance (SynRM) motor technology. W... More Details
4 kW and 5.5 kW are two of the most sought-after motor powers in industry. This exact power range is used in pumps, fans, compressors, conveyors, hydraulic units and countless gen... More Details
The frame of an electric motor is not merely a shell wrapping the windings and rotor; it is a load-bearing engineering component that directly governs rigidity, vibration behaviou... More Details
English
Türkçe