Water transfer, ventilation, smoke extraction, pressurisation... in every one of these tasks the power comes from a motor that often runs uninterrupted for long hours. Pump, fan and blower applications are among the places where motors work hardest in industry. At HEM Motor we produce motors tailored to these applications in-house and deliver from stock, offering durability and efficiency together.
Because these systems usually run non-stop, motor efficiency feeds straight into the annual energy bill. Slip near full load in our motors is about 4%, and they are built with IP55 protection and Class F insulation. In high-temperature applications such as smoke extraction, the insulation class and protection level become decisive in selection.
In these applications the lowest operating cost comes from pairing a high-efficiency motor with a variable speed drive (inverter); adjusting flow on demand brings significant savings. For more efficient options see our IE4 and IE5 series. For model selection to suit your system, current stock and a quote, call +90 (532) 345 49 86 or use our contact page.
In thermal power plants, cement factories and large boiler facilities, flue-gas desulfurization (FGD) systems used to capture sulfur dioxide (SO₂) from flue gas rely on recirculati... More Details
Humidity and temperature control inside a greenhouse is one of the most critical determinants of crop yield and plant health. Especially during summer, fogging systems are used to ... More Details
At the heart of every drilling operation is the mud pump, which pumps drilling fluid (mud) down the wellbore at high pressure. This pump cools the bit, carries cuttings to the surf... More Details
When selecting electric motors for pump, fan and exhaust (aspirator) applications, engineers usually focus on power (kW), speed and efficiency class (IE3/IE4). Yet one critical qu... More Details
In boiler rooms, steam plants and central hot-water systems there is one component that is easy to overlook yet directly determines the continuity of the line: the condensate (retu... More Details
In pump, fan and blower applications, the most effective way to control flow, pressure and energy consumption is to adjust the motor speed precisely. In most cases a variable freq... More Details
The most common assumption in pump, fan and blower motors is that "the higher the IP rating, the better." This is not always true. For a fan motor running indoors in a clean, dry s... More Details
In a continuously running pump or fan motor, one variable decides bearing life above all others: getting the right amount of the right grease to the bearing at the right interval. ... More Details
In pump, fan and blower drives a large share of the noise a motor radiates comes from a single, often overlooked component: the cooling fan behind the motor and the fan cowl that c... More Details
A fire pump system is one of the most critical mechanical installations for the life safety of any facility, and the silent hero of this system is often overlooked: the jockey pump... More Details
In a food and beverage plant a pump, fan or blower motor must do far more than simply provide the right power and speed; it has to survive an aggressive hygienic cleaning regime, h... More Details
At the heart of aeration basins in wastewater treatment plants, anaerobic digesters (fermenters) in biogas facilities, and many industrial process tanks lies a component that is of... More Details
In fan and exhaust (aspirator) applications, the impeller is often mounted directly onto the motor shaft end. In this directly coupled arrangement, with no belt-and-pulley interme... More Details
Stopping a pump or fan motor looks trivial at first glance: you cut the power and the motor stops. Yet on large-diameter pipelines, high-head centrifugal pumps and heavy-impeller f... More Details
Fan selection in air handling units and ventilation systems has undergone a fundamental change in recent years. Traditional scroll-housing fans are increasingly being replaced by f... More Details
A vertical hollow shaft (VHS) motor is a special class of machine used to drive deep-well turbine pumps and vertical line-shaft assemblies, and it follows design rules completely d... More Details
In variable air volume (VAV) fan and exhaust applications, the most critical decision is how you control airflow. For years many facilities have throttled fan flow by closing a dam... More Details
In water supply, cooling towers, fire mains and process feed systems, connecting several pumps in parallel rather than using one large pump is a common engineering choice. Parallel... More Details
When buying a pump or fan motor, the catalogue figures most people check are power and speed; yet in a large-impeller fan the real cause of a burnt winding or a protection relay th... More Details
Roof exhaust fans are indispensable ventilation equipment that expel dirty air, heat, moisture and smoke from buildings by the shortest route. They are used across a wide range, fr... More Details
English
Türkçe