Blog

The most common confusion when ordering an electric motor comes from power being given sometimes in horsepower (HP) and sometimes in kilowatts (kW). A machine's nameplate may read ... More Details

When you look for a motor for your conveyor, mixer or dosing line, what you usually need is not a stand-alone electric motor but a monoblock geared motor that delivers the right ou... More Details

The short answer to "is an IE5 motor expensive?" is this: the initial purchase price of an IE5 motor is higher than an IE4 or IE3 motor, but in the right application this differenc... More Details

The strongest aspect of switching to high-efficiency motors is energy savings; but there is a second lever that significantly accelerates the payback of this investment: state ince... More Details

11 kW and 15 kW are the most sought-after medium-power electric motors in Turkish industry; from pumps to conveyors, from fans to compressors, these two powers appear in countless ... More Details

When the main crusher motor stops in a stone crushing plant, the whole line stops; that is why crusher motor kW selection is a commercial decision that directly determines both you... More Details

When a circulation pump stops in a boiler room, the heating stops with it; that is why your priority in selecting an in-line or circulation pump motor is not technical perfection b... More Details

Elevator and escalator systems are drive applications that must operate continuously and safely; in these systems the motor not only provides motion but also undertakes critical ta... More Details

One of the most costly decisions encountered when supplying a motor for a facility is whether a standard asynchronous motor is sufficient. In environments carrying the risk of expl... More Details

There are two power values most in demand in industry: 5.5 kW and 7.5 kW. Because these powers correspond to a wide range of applications, from conveyor and belt drives to pump and... More Details

Using a standard electric motor in environments containing explosive gas, vapour or dust is not just a non-compliance but a direct risk to life and property. In such environments, ... More Details

When buying an electric motor, most businesses look only at the power rating (kW) and speed (rpm); however, the duty type (operating class) that defines how long, in what rhythm an... More Details

You replaced one motor with a high-efficiency model in your plant and saw the energy saving with your own eyes; now you want to spread this gain across your entire motor fleet, but... More Details

When looking for a motor for a mixer, crane, mill or a slowly rotating conveyor system, slowing a high-speed standard motor with a gearbox is the first solution that comes to mind.... More Details

If the bearings in your crusher, jaw crusher, impact crusher or mill motor fail far earlier than you expect, the motor stops frequently and every stop hits your output, the problem... More Details

If the aeration blower in your wastewater plant, the vacuum pump in your packaging machine or the side channel blower motor on your food line runs 24 hours a day, seven days a week... More Details

If the cast iron body of your industrial electric motors collects a little more dirt every shift and the motor runs hotter as a result, this guide is written directly for your purc... More Details

Two asynchronous motors of the same power, if their pole counts differ, turn at different speeds and often offer different efficiency and power factor values. So the question "how ... More Details

The sound of motors running in a production hall or a building's technical space concerns both worker comfort and occupational safety regulation. But noise is not merely a comfort ... More Details

When a conveyor stops, the load must not slide back; a crane must hold the suspended load safely; on an emergency stop the motion must be cut instantly. These three needs are met n... More Details