Drawing water from a deep well requires a special motor that operates underwater, meters below the surface: the submersible pump motor. Unlike surface pumps, this motor is lowered ... More Details
The power stated on an asynchronous motor's nameplate assumes a balanced (symmetrical) three-phase supply. In a real grid, however, the voltages of the three phases are often not e... More Details
Taken on its own, grounding an electric motor looks simple: the frame is connected to earth and safety is ensured. But once the motor is driven by a variable frequency drive (VFD),... More Details
In underground mines and long tunnels, ventilation is the foundation not of production but of life safety. The main ventilation fans that force fresh air into the mine or extract f... More Details
One of the most common and most critical checks when commissioning an IE3 efficient asynchronous motor in the field is the direction of rotation. A motor can be correctly wired, ha... More Details
kW tells you “how powerful” an electric motor is; but torque (moment, Nm) tells you how forcefully that motor can turn the machine. What will lift the load — or f... More Details
You bought an efficient motor — but was the efficiency on the nameplate actually achieved in the field? For facilities that want to put measured real savings into a savings r... More Details
However safely an IE4 motor runs at a sea-level plant, running that same motor at the same power at a mine or highland facility at 1500 metres may not always be possible. The reaso... More Details
Even when a cast iron electric motor looks rugged on the outside, the part that actually transmits torque to the machine is the shaft. The shaft is the lifeline that carries the mo... More Details
IE5 synchronous reluctance (SynRM) motors stand out not only for their ultra-premium efficiency class but also for the dynamic torque behaviour they gain through drive control. In ... More Details
Centrifugal and turbo blowers are dynamic-type air machines that deliver a large volume of air at low or medium pressure. They are at the heart of high-airflow applications such as... More Details
The most reliable way to know whether an asynchronous motor can drive a load correctly is to read the motor's speed-torque (M-n) curve. This curve shows how much torque the motor p... More Details
When ordering an electric motor, the voltage and frequency values on the nameplate are the most fundamental data determining where and how the motor will operate. In Turkey and Eur... More Details
The shaft hoist and skip systems that lift ore from hundreds of metres below ground to the surface are among the most critical and most demanding pieces of equipment in a mine. At ... More Details
Before connecting an IE3-efficient three-phase motor to the panel, the single most critical question is this: should the windings be wired in star (Y) or delta (Δ)? This decision i... More Details
An efficient motor consumes electricity even while idling without drawing load. Although the motor seems to be doing nothing, the iron loss spent building its magnetic field and th... More Details
You bought a high-efficiency IE4 or IE5 motor; the efficiency figure on the nameplate is impressive. But if the transmission element (belt or coupling) that carries the power from ... More Details
If you run your IE4 motor with a variable frequency drive (VFD) to produce continuous full torque at low speed, the fan on the motor's own shaft end may let you down halfway. In a ... More Details
If you are going to mount a cast iron motor to a gearbox, pump or machine via a flange, a single letter in the order code decides whether the motor will seat on the machine. Is the... More Details
An IE5 synchronous reluctance (SynRM) motor delivers its ultra-premium efficiency only when driven by a correctly matched variable frequency drive (VFD); therefore the DC bus volta... More Details
English
Türkçe