Blog

If you run a business in İzmir's Bornova, Gaziemir or Buca districts, what you care about most during a motor failure or a new line setup is speed: sourcing the right electric mot... More Details

When buying a new high-efficiency electric motor for your plant, the most current question is: IE5 or IE4? While IE4 Super Premium motors remain the backbone of the market, the IE... More Details

An electric motor's noise and vibration are often not just a comfort matter; high noise and vibration directly affect both workplace standards and the life of the motor and the con... More Details

In crusher and stone-crushing plants, the moment the motor is stressed the most is the initial start. A heavy flywheel mass and a crusher with material left inside demand very high... More Details

İzmir is the heart of Aegean industry, and the Atatürk Organized Industrial Zone (AOSB, Çiğli) and the Pancar Organized Industrial Zone (Torbalı) are two of its busiest production ... More Details

Replacing an old standard-efficiency (IE1/IE2) motor that has run in your plant for years with an IE4 motor is a deferred but high-return investment for most operations. As energy ... More Details

Getting two different speeds from a single motor is a direct purchasing advantage for many machine builders and plant operators. Dual-speed (Dahlander) asynchronous motors let you ... More Details

When buying an asynchronous motor, most buyers look only at power (kW) and speed (rpm); yet for hard-starting loads one more parameter is critical: the torque class (Design N / Des... More Details

If you are about to buy an electric motor for hot and dusty environments such as cement, stone crushing, foundry, mill, boiler room or open field, the right decision has two pillar... More Details

If you are a project manager or buyer about to purchase an IE4 Super Premium motor, the most critical question is often not the motor's technical spec but "when will it be in my ha... More Details

Before buying an IE3 motor, the question buyers most often get stuck on is simple: "Which efficiency class is mandatory at my power? Does the motor in stock comply?" This article i... More Details

If you are evaluating the purchase of an IE5 synchronous reluctance motor, the first thing you need to know is not a technical curiosity but a fact that directly shapes your order ... More Details

Mount the same reducer horizontally, vertically or inverted under a ceiling; the housing is the same, but the behaviour of the oil inside it changes completely. The reducer mountin... More Details

In a lifting or conveyor application, the most critical question is often this: when the motor stops, will the load run back? One of the most valuable features of worm gear reducer... More Details

You connected the motor, threw the switch, and instead of the pump pushing water it pushes air back, or the fan turns the wrong way. In this scene there is usually no fault in the ... More Details

You are about to order a motor for a new machine, and there is always the same hesitation in the room: "Let me buy one a bit bigger, just to be safe." Yet an oversized motor wastes... More Details

Food factories are among the production sites where hygiene and operational continuity matter most. Dozens of drive points such as conveyors, packaging machines, mills, mixers and ... More Details

Cement factories are among the most energy-intensive industrial plants in any country, and almost all of this energy is converted into work through electric motors. Mills alone con... More Details

Water and wastewater treatment plants are facilities that run around the clock without stopping; at the heart of these plants sit the blower (aeration), mixer and transfer pump mot... More Details

When an electric motor's winding burns out, the business's loss is not just the cost of the motor: the production halted during replacement, the equipment removed and refitted, and... More Details