Electric Motor Price List 2026 – Asynchronous Motor Prices

Electric motor prices in 2026 vary depending on motor power, rotational speed, efficiency class, mounting type, frame material, voltage and application requirements. For this reason, an electric motor price list should be evaluated together with the motor’s technical specifications rather than only its purchase price.

HEM Motor supplies three-phase asynchronous electric motors for industrial plants, machine manufacturers, pump systems, ventilation equipment, compressors, conveyors, crushing plants and many other heavy-duty applications.

Our product range includes asynchronous motors from 0.25 kW to 355 kW, with different speed, efficiency and mounting options. Customers looking for an electric motor price list 2026, three-phase motor prices, IE3 motor prices or IE4 asynchronous motor prices can contact HEM Motor for current stock information and a project-specific quotation.

Electric Motor Price Ranges in Türkiye 2026

Asynchronous electric motor prices in Türkiye vary depending on the motor brand, energy-efficiency class, frame material, rotational speed, mounting type and the discount rate applied by the seller.

The following table shows approximate 2026 market price ranges in Türkiye for 10 commonly used three-phase electric motor ratings between 1.1 kW and 250 kW.

Important notice: The figures shown in the table represent approximate VAT-inclusive retail price ranges observed in the Turkish market. They do not constitute a binding HEM MOTOR sales quotation.

Why Do Asynchronous Motor Prices Vary?

Two electric motors with the same rated power can have significantly different prices. A 5.5 kW motor, for example, may be manufactured with different frame materials, winding quality, efficiency levels, bearing brands, protection classes and mounting arrangements.

The most important factors affecting electric motor prices are explained below.

Motor Power

Motor power is one of the main factors determining the price. As motor power increases, the amount of copper, electrical steel, cast iron and other raw materials used in production also increases.

A 0.75 kW electric motor is compact and relatively lightweight, while a 75 kW or 355 kW industrial motor requires a much larger frame, heavier bearings, a stronger shaft and a more advanced cooling system.

For this reason, high-power electric motor prices rise considerably compared with small and medium-power motors.

IE3 and IE4 Efficiency Class

Efficiency class has a direct effect on both purchase price and operating cost.

HEM Motor offers IE3 Premium Efficiency and IE4 Super Premium Efficiency asynchronous motor options. High-efficiency motors are designed to reduce electrical losses and convert a greater proportion of electrical energy into mechanical power.

Although an IE4 electric motor may initially cost more than a standard motor, the energy savings achieved during continuous operation can help compensate for the price difference over time.

This is especially important in:

• Factories operating multiple shifts
• Pumping stations
• Ventilation systems
• Compressors
• Conveyors
• Crushing and screening plants
• Production lines operating continuously
• Industrial fans and blowers

When comparing the price of an electric motor, buyers should consider not only the purchase price but also energy consumption throughout the motor’s operating life.

1000 RPM, 1500 RPM and 3000 RPM Motor Prices

Motor speed is another important factor affecting asynchronous motor prices.

HEM Motor provides different speed alternatives, including:

• Approximately 1000 rpm, six-pole motors
• Approximately 1500 rpm, four-pole motors
• Approximately 3000 rpm, two-pole motors

A motor described as a 1500 rpm electric motor generally operates at an actual full-load speed of approximately 1400–1485 rpm. Similarly, a 3000 rpm motor normally operates at approximately 2800–2980 rpm, depending on power, load and motor design.

In many power ratings, 1000 rpm motors are more expensive than equivalent 1500 rpm or 3000 rpm motors. This is because low-speed motors may require larger frames, additional active material and different winding designs.

Therefore, the required speed must be specified when requesting an electric motor quotation.

1500 RPM Electric Motor Price List

Four-pole, approximately 1500 rpm asynchronous motors are among the most widely used industrial electric motors. They provide a practical balance between speed, torque and mechanical durability.

Common applications include:

• Centrifugal pumps
• Hydraulic power units
• Industrial fans
• Air compressors
• Conveyor systems
• Stone crushers
• Screening machines
• Mixers
• Feed production machinery
• Flour mills
• Packaging machinery
• Recycling equipment
• Machine tools

The price of a 1500 rpm motor depends on its power, mounting type, efficiency class and frame material. HEM Motor supplies 1500 rpm motors in a wide range of power ratings for both machine manufacturers and industrial replacement requirements.

3000 RPM Electric Motor Prices

Two-pole, approximately 3000 rpm motors are preferred in applications requiring higher shaft speed.

They are commonly used in:

• High-speed centrifugal pumps
• Industrial fans
• Blowers
• Certain compressor systems
• Cutting machinery
• Grinding machines
• High-speed production equipment

A 3000 rpm motor may have a different frame size and price compared with a 1500 rpm motor of the same power. The driven machine must be suitable for the selected speed.

Using a motor with the wrong speed may cause insufficient performance, excessive vibration, mechanical damage or unsafe operating conditions. Therefore, motor selection should always be based on the machine’s technical requirements.

Mounting Type and Electric Motor Price

Electric motor mounting arrangements determine how the motor is connected to the machine.

HEM Motor offers commonly used mounting types such as:

B3 Foot-Mounted Motor

B3 motors are mounted horizontally using feet located on the motor frame. They are widely used in pumps, compressors, conveyors, crushers and general industrial machinery.

B3 is one of the most common and economical mounting arrangements.

B5 Flange-Mounted Motor

B5 motors have a large flange and are mounted directly to the driven equipment. This mounting type is commonly used in pumps, gearboxes, fans and special machines.

Depending on frame size and stock availability, B5 motor prices may differ from B3 motor prices.

B35 Foot and Flange-Mounted Motor

B35 motors combine B3 feet with a B5 flange. This provides greater installation flexibility and is often preferred by machine manufacturers.

Because the motor includes both feet and a flange, the B35 price may be slightly higher than the standard B3 version.

B14 and B34 Motors

B14 motors have a smaller face flange, while B34 motors combine the small flange with mounting feet. These arrangements are frequently used in compact machinery, pumps, gearboxes and automation systems.

When requesting a quotation, the required mounting arrangement should always be clearly stated.

Aluminium Body and Cast-Iron Motor Prices

Frame material is another factor that influences electric motor prices.

Aluminium-body motors are lighter and easier to handle. They are often preferred in lower power ratings and applications where weight is important.

Cast-iron motors provide a strong, rigid and durable frame structure. They are commonly used in demanding industrial environments, high-power applications, crushing plants, mining equipment, conveyors, compressors and heavy machinery.

HEM Motor’s cast-iron asynchronous motors are designed for industrial durability, stable operation and long service life. The robust frame structure can also contribute to reduced mechanical deformation and improved resistance to demanding operating conditions.

Copper Winding Quality

The winding is one of the most important components of an asynchronous electric motor.

HEM electric motors use 100% copper windings. Copper provides high electrical conductivity and supports efficient operation, controlled temperature rise and long winding life when the motor is correctly selected and operated.

Electric motors manufactured with insufficient conductor material or low-quality winding systems may have a lower initial price. However, they may also operate at higher temperatures, draw more current or have a shorter service life.

For industrial customers, the lowest-priced motor is not always the most economical motor. Winding quality, insulation, bearing quality, electrical steel and manufacturing accuracy must all be considered.

Protection and Insulation Class

Industrial motor prices may also vary according to protection and insulation specifications.

HEM Motor products can be supplied with industrial features such as:

• IP55 protection class
• Class F insulation
• Totally enclosed fan-cooled construction
• Continuous-duty operation
• High-quality bearing systems
• Durable cast-iron frame options
• Balanced rotor structure
• Reduced vibration and noise
• IE3 and IE4 efficiency alternatives

IP55 protection helps protect the motor against dust and water jets under defined test conditions. However, the motor should still be installed correctly and protected against flooding, aggressive chemicals and unsuitable environmental conditions.

Class F insulation provides an appropriate thermal insulation structure for many industrial applications. Correct motor sizing and adequate ventilation are essential for maintaining long service life.

Electric Motor Prices for Machine Manufacturers

Machine manufacturers often require different prices from retail customers because purchasing conditions are based on quantity, continuity and technical standardisation.

HEM Motor provides project-based quotations for:

• Original equipment manufacturers
• Industrial machine manufacturers
• Pump manufacturers
• Fan and ventilation equipment manufacturers
• Compressor manufacturers
• Conveyor manufacturers
• Crushing and screening plant manufacturers
• Concrete batching plant manufacturers
• Agricultural machinery manufacturers
• Recycling machinery manufacturers
• Hydraulic system manufacturers
• Food-processing machinery manufacturers

For regular purchases or high-volume requirements, HEM Motor can prepare special wholesale and dealer pricing.

Standardising motor power, speed, mounting type and efficiency class across a machine series may also simplify purchasing, installation, spare-parts management and after-sales service.

Wholesale Electric Motor Prices

Wholesale asynchronous motor prices depend on:

• Total order quantity
• Distribution of power ratings
• Delivery schedule
• Available stock
• Required efficiency class
• Mounting arrangement
• Special voltage requirements
• Export packaging
• Transport conditions
• Dealer or OEM agreement

HEM Motor aims to provide competitive electric motor prices without compromising essential technical features such as copper winding quality, efficiency, mechanical strength and operational durability.

Customers requiring multiple motors should submit a list containing power, speed, mounting type, quantity and application information. This allows a more accurate and economical quotation to be prepared.

How to Request an Accurate Electric Motor Price

To receive the correct asynchronous motor price, please provide the following information:

Motor power: 0.75 kW, 5.5 kW, 22 kW, 75 kW or another required rating.

Speed: Approximately 1000, 1500 or 3000 rpm.

Mounting type: B3, B5, B14, B34 or B35.

Efficiency class: IE3 or IE4.

Voltage and frequency: For example, 380–400 V, 50 Hz.

Duty type: Continuous duty or a special operating cycle.

Quantity: Number of motors required.

Application: Pump, fan, compressor, conveyor, crusher, mixer or another machine.

Special conditions: High ambient temperature, high altitude, inverter operation, outdoor installation or a special shaft requirement.

Providing complete technical information prevents incorrect motor selection and makes it possible to prepare the most suitable price quotation.

Why Choose HEM Motor?

HEM Motor combines competitive prices with technical features required by industrial customers.

Our main product advantages include:

• Three-phase asynchronous motor solutions
• 0.25–355 kW power range
• IE3 and IE4 high-efficiency options
• 1000, 1500 and 3000 rpm alternatives
• B3, B5 and B35 mounting options
• 100% copper windings
• Strong cast-iron frame alternatives
• IP55 protection
• Class F insulation
• Continuous-duty motor options
• Long-life bearing systems
• Low-vibration design
• Reduced operating noise
• Wide stock capability
• Fast quotation and shipment support
• Wholesale and OEM pricing

HEM Motor products are suitable for both new machinery and replacement motor requirements. Our technical team evaluates power, speed, torque, mounting and operating conditions to help customers select an appropriate motor.

Frequently Asked Questions About Electric Motor Prices

How much does an asynchronous electric motor cost in 2026?

In 2026, standard three-phase asynchronous motor prices may begin at approximately 4,000–6,000 TL for small power ratings. Depending on power, efficiency and configuration, large industrial motor prices can exceed 1,000,000 TL.

A final price can only be provided after motor power, speed, mounting type and efficiency class are confirmed.

How much is a 1.5 kW electric motor?

The approximate 2026 price of a standard 1.5 kW three-phase asynchronous motor is generally between 7,000 TL and 14,000 TL, depending on speed, efficiency class, body material and mounting type.

How much is a 5.5 kW electric motor?

A standard 5.5 kW asynchronous motor may cost approximately 17,000 TL to 31,000 TL in 2026. Cast-iron construction, flange mounting, low-speed design or a higher efficiency class can increase the price.

How much is an 11 kW electric motor?

The approximate price range for an 11 kW three-phase motor is 30,000 TL to 48,000 TL. The final price depends on whether the motor is 1000, 1500 or 3000 rpm and whether it has B3, B5 or B35 mounting.

How much is a 22 kW electric motor?

A standard 22 kW IE3 asynchronous motor may cost approximately 55,000 TL to 90,000 TL. Low-speed motors and special mounting arrangements may be priced higher.

How much is a 55 kW electric motor?

The approximate 2026 price of a 55 kW industrial asynchronous motor is between 160,000 TL and 235,000 TL for many standard configurations. IE4, special voltage, special bearings or non-standard mechanical modifications may affect the final quotation.

Are IE4 motors more expensive than IE3 motors?

IE4 motors generally have a higher initial purchase price because they are designed to achieve lower electrical losses. However, an IE4 motor may provide a lower total operating cost in applications with high annual operating hours.

Does a B5 flange increase the motor price?

A B5 or B35 mounting arrangement may cost more than a standard B3 foot-mounted motor. The difference depends on frame size, flange dimensions and stock availability.

Are electric motor prices inclusive of VAT?

Unless specifically stated in the quotation, industrial electric motor prices are generally presented excluding VAT. Transport, coupling, frequency inverter, installation and other accessories may also be quoted separately.

Request the Current HEM Motor Price List

Electric motor prices can change due to raw-material costs, copper prices, exchange rates, freight expenses, stock levels and production conditions. For this reason, customers should request a current quotation before placing an order.

Contact HEM Motor for:

• Current 2026 electric motor price list
• IE3 electric motor prices
• IE4 electric motor prices
• 1000 rpm motor prices
• 1500 rpm motor prices
• 3000 rpm motor prices
• B3, B5 and B35 motor prices
• Wholesale electric motor quotations
• OEM motor supply
• Dealer price lists
• Export quotations
• Stock and delivery information

HEM Motor offers reliable asynchronous electric motor solutions for machine manufacturers, industrial facilities, maintenance companies and electric motor dealers.

For the correct motor selection and the most competitive available price, send us your required power, speed, mounting type, voltage, quantity and application information.

HEM Motor – High Efficiency Asynchronous Electric Motors for Industry